1. Connect the loudspeaker to the Audio Out jack.
2. Connect the microphone to the Audio In jack.
   
   
   
   
3. Connect mini din to COM port.
4. Connect mini din to COM port.
5. Connect the male D-Sub to the female D-Sub.
   
   
   

Software Setting of Camera Server

There are three important points should be check for Camera Server in connecting with Voice Server.

1. Never use COM1 as console in Camera Server when connecting with Voice Server, since only COM1 could be used for communication.
2. Set serial mode to RS232 for COM1.
3. Set the communicating Baud Rate to 38400.