| How to reset the device back to factory defaults |
|



Factory Default procedures:
- Find the factory default holes or factory default button
- Turn off the power
- Insert a pin into the factory default hole / press on the reset button and do not let go until told to do so
- Turn on the power and wait for the LED to flash, remove the pin / release the button before the 3rd flashes.
- Wait around 30 seconds for device to reboot before using
MJPEG Series
http://www.pixord.com/doc/Manual/NVS/appen3.htm
Compact Network Camera P300
http://www.pixord.com/doc/Manual/P300/p12.htm
MPEG4 Series
http://www.pixord.com/doc/Manual/P1400/p2.htm
|