Network Camera
Video Server
Storage
IP Extender
Accessories
Software

Video Server  

 
 PV6901 H.264 Network Video Server (1CH)

PiXORD PV6901 professional H.264 Network Video Server (1CH) provides full control of surveillance platform. The analog video and audio can be compressed and distributed over Intranet or Internet through the network connection. The PV6901 can deliver simultaneous H.264 and MJPEG multiple streams, allowing for optimization in bandwidth and image quality. The live video and audio streams are of the highest quality with video streams available at full frame rate for Full D1 resolution, and can be recorded remotely.

Having one USB 2.0 slot supporting external storage, the video/audio can also be recorded in local. It successfully integrates analog system into IP surveillance to remove the barriers of remote monitoring without sacrificing image quality.


Features

Built-in Web Server providing Internet capability for remote access
H.264/MJPEG dual compression formats
Simultaneous H.264 and MJPEG stream for multiple clients
Supports up to 30/25 FPS at Full D1 resolution
RS-485 Interface for PTZ Camera Control (To be firmware upgraded)
Intelligent Motion Detection
Digital I/O for Sensor and Alarm
IP setup by easy IP Installer/DHCP/Static IP
Event handling trigger by alarm/motion and action to send video clip by Email / FTP
USB 2.0 Host port support external storage connection for local recording
IP setup by easy IP Installer / DHCP / Static IP/DDNS
NTP (network time server) with DST supported which provide accurate unify system time
Hardware watchdog providing robustness system in critical environment
Support RTSP Stream for 3G mobile phone live view

Download
Firmware
User's Manual
Data Sheet
QIG
Specifications
 
Specifications

Spec
Video Compression H.264 / Motion JPEG
Video Resolution Full D1: NTSC = 720 x 480; PAL = 720 x 576
CIF: NTSC = 352 x 240 ; PAL = 352 x 288
Bit Rate 64K ~ 6M bits/sec (CBR / VBR configurable)
Frame Rate 30 FPS for all resolution
Video Control controllable frame/ bitrate (bandwidth), VBR/ CBR control, RTSP Path
Analog Video Input/ Output 2 x BNC ( 1 x video input, 1 x video output)
Pan/ Tilt/ Zoom control Yes, supports Pelco-P, Pelco-D, Lilin, Dynacolor protocols
Event System Trigger GPIN, Motion detection, Manual Trigger
Action Notified upload via FTP, e-mail and save to USB storage
Notification via email
External output activation
Local Storage USB interface for one HDD
Network Interface 10BASE-T / 100 BASE-TX
Protocols HTTP, HTTPS, TCP/ IP, IPv4, UDP, SMTP, FTP, DHCP, DDNS, NTPUPnP, Bonjour, DNS, ARP, ICMP, RTSP, RTP
Audio Capability 1x 3.5mm Line in jack, 1x3.5mm Line out jack
Operating Environment
Operating Temperature 0° ~ 50°C
Operating Humidity 20% ~ 80% RHG
Power Supply

AC/DC switching power adaptor, Input: AC100~240V, Output: DC 12V / 2A

Mechanical Design
Dimensions 121(L) x 119(W) x 46(H) mm
Net Weight 440g (approximately)
I/O
I / O Connectors

2 x BNC connectors for analog video in / out

2 x Line jacks ( Audio In / Out )
2 x USB 2.0 Host ports
1 x Mini-DIN for RS-485 ( to be firmware upgraded)
/ Photo-coupled GPIN / Relay GPOUT / Video out
1 x Reset hole to restore factory defaults
1 x RJ-45 Ethernet connector with 2 LEDs ( power / status)
1 x DC In connector
1 x Dip Switch for 75Ω
Package
Package Contents

1 x CD (manual and software)

1 x Mini Din to Terminal block extend cable

1 x AC/DC Power Adaptor

1 x Warranty Card

Copyright© 2007, PiXORD Corporation.
is a registered trademark of PiXORD Corporation. All rights reserved.