PiXORD IP Extender (PM112/PM111) is the latest broadband wiring technology, which may thoroughly solve IP cameras' troublesome wiring problems. PM112/PM111 enables to cabling the IP surveillance fast, and Save the cost.
PM112/PM111 can use coaxial cable or phone line (Twisted Pair) as the transmission medium. Therefore, for those areas having existed wires (original analog surveillance), as long as installing PM112/PM111, there is no requirement for camera transmission wires or re-wiring. Regarding to system integrators, it not only makes wiring more convenient, but saves time and cost. PM112/PM111 is the best solution for system integrators (SI).
Features
Plug & Play
Long transmission distance, within 1.5 Kilo Meters no repeater is required
Bandwidth support up to 33 IP Cams within the distance of 200 meters, 6 ~ 8 cameras within 1.5 KM
Support long distance/power unreachable. (Road, Bridge)
Support high interference environment. (Elevator, Tunnel)
RS-485 integration for entrance, fire or alarm control.
Modular design, quick installation and cost reduction in wiring.
Use phone line/cable system. Compatible to existing phone and cable system.
PiXORD IP Extender provides the advantage of low cost in physical layer design of network surveillance and management. The reason for such design reducing the required cost is that the video & audio transmission is done via the legacy coaxial cable or telephone line. Thus, installation of PiXORD IP Extender is quite straightforward and cost effective on cabling; no additional cables are required.
Simple Installation
No software/driver installation is required; simply plug and ply. It is compatible with any network protocol. PiXORD IP Extender are applied in pairs. Each PiXORD IP Extender has one connection to its opposite PiXORD IP Extender and the other connection (RJ45) to the network devices. Therefore, by bridging an existed connection, it is just as straight RJ45 to RJ45 connection. No MAC or IP address is required to set for PiXORD IP Extender.
Distance and bandwidth
Measuring by the official bandwidth meter, Smart Bits, PiXORD IP Extender in the transmission distance of 1.5KM (1500 meters) can still keep in 25 ~ 30 Mbps. Upon this condition, the bandwidth is plenty for video transmission of 8 IP cameras (calculated by 3 Mbps bandwidth required for each camera). In addition, as the plenty of bandwidth it also supports the transferring of high definition television (HDTV) signal which is applicable to those video & audio service providers.
Environmental application
By applying the existed cables, PiXORD IP Extender can meet the requirements of interference-resistant (tunnels, lifts) or distancing (countryside, villages, bridges). Furthermore, the RS485 compliant model can integrate with the functions of fire, entrance, alarm, control management and etc.
IP cam with Ethernet cable
Transmission distance is limited, up to 100 meters.
Ethernet cable is improbable for outdoor usage.
IP cam with PiXORD IP Extender
Transmission distance can be extended over 1 KM.
Broad band (100Mbps) can support for multiple IP cams input.
Telephone line / coaxial can be more probable for outdoor usage.
Specifications
Model Name
PM112/PM212
/PM111
Dimension
126(W)*95(D)*30(H)(mm)
126(W)*95(D)*30(H)(mm)
Weight
311±5g
311±5g
LED Indicators
Green-PW for power
Green-CPE/CO
Green-Link for data link
is a registered trademark of PiXORD Corporation. All rights reserved. 
IP Extender
