| Standards |
IEEE802.3 10Base-T |
| IEEE802.3u 100Base-TX |
| IEEE802.3x Flow Control and Back pressure |
| IEEE802.3af/at PoE |
| Data Architecture |
Store and Forward |
| PoE RJ-45 pin assignment |
RJ-45 port 1~4 support IEEE802.3af/at |
Positive (VCC+) : RJ-45 pin 4, 5
Negative (VCC-) : RJ-45 pin 7, 8
Data : RJ-45 pin 1, 2, 3, 6 |
| PoE Standard |
IEEE802.3af/at (PM342E Remote Side) |
| Connector |
RJ-11 x 1 or Terminal block x 1 for Twisted-pair Phone cable |
4 Port RJ-45 for 10/100Base-T(X) Ethernet, and IEEE802.3af/at PoE
(PoE port only for PM342E Remote Side) |
| Ethernet Cable |
UTP/STP above Cat. 5e cable, EIA/TIA-568 100-ohm (100m) |
| Transmission Cable |
Twisted-pair Phone cable above 24AWG |
Signal
Transmission |
Distance |
1200 Meters |
| Bandwidth UL/DL |
6.5/28Mbps@1200 Meters |
| Power Transmission |
Distance |
1200 Meters |
| Output Power |
PoE, 40 Watt totally ; Max 19 Watt for single port |
| Application |
PoE IP Camera, PoE IP Phone, Wireless AP |
| Power Feeding Watt |
Powering Feeding by Twisted-pair Phone cable up to 40W for total @1,200M.
Support per Ethernet port up to IEEE802.3at 18.5W maximum. |
| Performance and Power Feeding |
Distance of Twisted-pair Phone cable VS. Speed and Power
| Distance (Meter) |
300M |
600M |
900M |
1200M |
| Throughput Download/Upload |
45/81 |
29/62 |
15/43 |
6.5/28 |
| Power Feeding by Phone Cable |
40W |
40W |
40W |
40W |
Tested under room temperature 25°C ; 24AWG twisted-pair phone cable |
| Power Input |
100~240VAC (PM342E Local Side) |
| DIP SW (DIP Switch) |
| DIP SW |
SW 1
CO/CPE |
SW 2
Transmit Mode(1) |
SW 3
Transmit Mode(2) |
SW 4
Signal S/N |
| ON |
CPE |
Fast |
Asymmetric |
6 dB |
| OFF |
CO |
Interleave |
Symmetric |
9 dB |
|
| LED |
LAN port 1~4 : LAN Link/Active (Green) |
| PWR : Green (ON : Device Power ON) |
| CPE OFF : ACT as CPE(Remote Side) ; CPE ON : ACT as CO(Local Side) |
| LINK ON : Link ; LINK Flash : Linking ongoing ; LINK OFF : Disconnect |
| Dimension |
PM342E Local Side : 200 x 190 x 48 mm (W x D x H)
PM342E Remote Side : 170 x 170 x 44 mm (W x D x H) |
| Weight |
2.3KG (Total Weight) |
| 1.3KG (PM342E Local Side) |
| 1.0KG (PM342E Remote Side) |
| Housing |
Metal Case |
| Operation Temperature |
-10~50°C |
| Operation Humidity |
5~95% (Non-condensing) |
| Installation |
Desk and Wall Mount |
| Strike Protection |
Yes |
| SNR Detection |
Yes |
| Short Circuit Protection |
Present (Twisted-pair Phone cable Power Feeding Short Circuit Protection) |
| Surge Protection |
For Twisted-pair Phone and Network cable
EN61000-4-5 Level 3 Criteria B (Line to Ground 2KV) |
| Reverse Polarity Protection |
Twisted-pair Phone cable DC Power Feeding Polarity Protection
RJ-45 Network Cable PoE DC Power Polarity Protection |
| Certification |
CE, FCC, ROHS |
| EMI |
FCC Part 15 Subpart B Class B, EN55022 Class B |
