PiXORD NC Configuration


 
SYSTEM CONFIGURATION

CCD Module Settings (only for P201)


Electronic Shutter : The shutter will automatically adjust the exposure of the built-in CCD to get the better illumination when set to Open.

Auto Gain Control : Normally ˇ§offˇ¨ with maximum 10db gain, ˇ§onˇ¨ will increase to maximum 24db. It's useful to increase sensitivity in low illumination environments (set to ˇ§onˇ¨), but more gain will produce more noise.

Note: When using Lens with DC-Driver Auto IRIS capabilities, you must set ES to ˇ§offˇ¨ state in order to get optimal Lens performance.

Back