PiXORD Network Camera User's Manual


	Introduction

	Physical Characteristics

	Installation

	Assign IP using IP Installer

	PiXORD NC Home Page

	PiXORD NC Configuration

	Connecting your Camera

	Setting your camera with ADSL connection

	Viewing your camera from a Remote Location

	Appendix

	Home

PiXORD NC Home Page

Browsing Web User Interface
Start your Web browser and enter the URL（e.g.,“http://61.220.235.172”） in the Address field. The Home page of the PIXORD NC is now displayed:
The Web User Interface is organized in two sections, the Basic settings and the Advanced settings,

1. IP Address:

2. Video Source:

.Select Language:
Click on “Select Language” and a list of languages will be displayed. The following languages can be selected: English, Chinese Traditional, Chinese Simplified. Japanese and French options are reserved for future additions.

Video Size:
You can adjust the video size and appearance on the screen with the following sizes:

Video Size	NTSC Video	PAL Video
Small (QSIF)	176 x 112	176 x 144
Default (SIF)	352 x 240	352 x 288
Large (FULL)	704 x 480	704 x 576

Note: NTSC (60Hz) is the common standard in the USA, whereas PAL (50Hz) dominates in Europe.

Digital Size
You can select the aspect ratio. Sizes will be based on the video source selection, and they can be the following aspect ratios: X1, X2, and X3.

Snapshot:
Click to take a picture from the viewing video.

Config:
Click on it in order to view Configuration pages of PIXORD NC.

Remote Voice Status:
This feature will be shown only if the PIXORD VOS is connected to the PIXORD NC COM port and the PIXORD NC enable the streaming voice function.

Local Microphone Status (WEB UI from PC):
This feature will be shown only if the PIXORD VOS is connected to the PIXORD NC COM port and displays the local microphone connection to the computer.

When the PIXORD VOS is on, it can also be turned off. Both Remote Voice and Local Microphone can be turned off separately, once they are turned off by clicking on their icon, they will be showing the following figures:

3. Video Source Display

1	Indicates the selected Video Size
2.	Indicates the selected Aspect Ratio
3.	Recording: Clicking on this button, it will start to record live video. The file will be saved in a folder named PIXORD in your C Drive. The filename will be named under recPSVRecimage_ yyymmdd-hhmmss.avi Yyyy – Current Year Mm – Current Month Dd – Current Date Hh – Current Hour Mm – Current Minute Ss – Current second The file will be saved as an AVI file, which can be displayed with most media players.
4.	Maximize to full screen
5.	Rotation for 90 degrees. Clockwise direction.