Verify and Complete the Installation from Your Browser

Start your browser and enter the IP Address of your PIXORD NC in the Address field.

The PIXORD NC supports Microsoft Internet Explorer.
When the Web-based user interface runs for the first time through Internet Explorer, you must temporarily lower your security settings to perform a one-time-only installation of PIXORD's ActiveX component onto your workstation.

The procedure is the following:
From the Tools menu, select Internet Options
Click the Security tab and take note of your current security settings
Set the security level to Low and click OK
Type the Internet Address or Host Name of your PIXORD NC into the Address field
A windows-dialog asking if you want to install wcp10.cab will appear. Click yes to start the installation
Once the ActiveX installation is complete, return the security settings to their original value, as noted above

To continue the configuration of your own application, click the configure button in the top left corner of this window.