PIXORD IP Installer is the software that provides an easier way for setting the IP address and network configurations of the PIXORD's Network Camera. Using this tool, you can easily set multiple PIXORD NCs at the same time with the batch setting function. By utilizing IP Installer, the setting process is largely simplified and the setting time is effectively shortened. Moreover, IP installer can not only save all the configurations of PIXORD NC as a backup, but also it can restore the previous configurations of PIXORD NC.
Preparation before IP Assignment:
Always consult your network administrator before assigning an IP address to your server.
Make sure the PIXORD NC is powered on and correctly connected to the network.
Obtain an IP address not yet used from your network administrator.
MAC Address: Each PIXORD NC has a unique Ethernet address (MAC address) shown on the bottom of the PIXORD NC as the serial number (S/N) with 12 digits (e.g. 000429-XXXXXX) .