Ensure the PIXORD Network Camera is in power-off state.
Ethernet cable: Connect PIXORD NC to your network using twisted pair (CAT5) terminated with a standard RJ-45 connector.
If it is connected to a hub/switch, use a pass-through cable. If it is connected directly to a PC, use crossover cable.
Ensure you power supply adapter specification (Input AC 110V or 220V, Output DC 12V 1A) matches to your power line, and connect the power supply to the Network Video Server.
Check the power LED (red) is constant lit, and the network LED (display link status) should light up (red) less than 10 seconds if your network connection is correct.