Hardware
|
| System |
CPU: 32 Bits RISC Processor
ROM: 2M Bytes Flash ROM
RAM: 16M Bytes SDRAM
WatchDog: Chip to monitor out tolerance system voltage
and abnormal program execution |
| Connector |
Two LEDs to indicate network and power/system
status
One RJ-45 for Ethernet
One RS-232 serial port for external console
One RS-485 port for PTZ (pan/tilt/zoom) camera control
Four fully opto-isolated alarm inputs and one 3A, 125VAC/
30VDC Relay output |
| Video Channel |
1 internal CCD (P201) |
| 1 internal CMOS (P207) |
| HORIZONTAL
resolution: More than 380 lines |
| 1 Lux
(F2.0) - P201 |
| 2.5
Lux (F 1.4) - P207 |
Video |
| Lens |
Standard Package: equipped with CS mount
Focal length 6.0mm F1.8 Lens.Supporting of Direct Drive
Lens; Build-in VR for DC level adjustment. •
Optional: • i. Focal lens 4.0mm, Auto DC Iris
F1.2~64 Lens • ii. Vari-Focal lens 3.2~10mm,
Auto DC Iris F1.4~360 Lens
|
| Lens adjustment (only for P201) |
White Balance: Auto
Automatic Gain Control: Auto
Electronic Shutter: Up to 1/100,000 sec. (Linear) Auto
/ Off
DC IRIS |
| Image Compression |
JPEG; Motion JPEG |
| Video Adjustment ( P201) |
Brightness, Contrast, Hue, Saturation,
Video quality adjustment |
| Video Adjustment (P207) |
Brightness, Contrast, Hue, Saturation,
Video quality, sharpness, backlight, flickerness and light
condition adjustment |
| Resolutions (P201) |
NTSC: 704x480, 352x240, 176x112
PAL: 704x576, 352x288, 176x144 |
| Resolutions (P207) |
640x480, 320x240 |
Network
|
| Network Interface |
Ethernet (10/100 Base-T) |
| Protocols |
TCP/IP, UDP, ARP, ICMP, HTTP, FTP, Telnet,
SMTP, DHCP |
| Performance |
• Network throughput: Max. Up
to 800K bytes / sec. • 30 connections simultaneously
• Up to 30/ 25 fps |
Management
|
| Function |
• Supports remote recording
• Supports display rotation • Supports
full screen display • Multi-Languages support
|
| Event management |
Programmable Event Scripting
Triggered: • Time (Frequency) •
Sensor Input • Motion Detection •
Video/ Network status • CGI trigger
Action: • Store image to internal buffer (2M
Bytes pre and post-alarm) • FTP image to remote
site • E-mail image to specific account •
HTTP server push to remote site • Relay output
to control external devices • Alert transmission
to an HTTP listen server (for developers) |
| Installation |
Using ARP & Ping or IP-Installer software
to assign the IP address |
| Firmware Upgrade |
• Remote upgrade by FTP •
Customized web UI is upgradeable via FTP and Telnet |
| Client PC Requirements |
Windows 2000 SP4/Windows XP/Windows 98se/Windows ME
Internet Explorer 6.0
DirectX 9.0c |
| Security |
Multi-tiered access control |
Operating
Environment |
| Operating Temperature |
5 O ~50 O C (40 O ~ 125 O F ) |
| Input Voltage |
DC 12V |
| Power Consumption |
6 watts |
Mechanical
Design |
| Dimension |
135(L)*85(W)*40(H) mm |
| Accessories |
• CD Title with manual/software
• Quick Installation Guide • Ethernet
Cable • CS Ring adjust tool • Power
Adapter • Stand for Desktop/Wall/Ceiling •
One cable convert MiniDin to Dsub, to connect Com port
or GPIO |
