Hardware Installation

1. Ensure the MVS is powered off.
2. Connect the MVS to your network using twisted pair (CAT5) cable terminated with a standard RJ-45 connector. If it is connected to a hub/switch, use a pass-through cable. If it is connected directly to a PC, use a crossover cable.
3. Video input connection (either a or b, not both)
   a. Connect the video output from the camera using standard 75[ coaxial cable terminated with a BNC connector. (If connecting to a TV, VCR, etc. switch the corresponding DIP Switch to the off position.
   b. Connect the video output from the camera using a standard S-Video cable.
4. After ensuring that the power supply adapter specifications (Input AC 110V or 220V, Output DC 12V 1A) match the power source, connect the power supply to the NVS.
5. Verify that the power LED is a constant red and that the network LED is a constant green.